Starlink Internet certainly needs no introduction.
Does it?
Elon Musk’s ambitious Starlink is a satellite-based internet service provider that precisely uses LEO satellites to relay internet coverage to people.
| Did You Know? Starlink has recently obtained a one-year licensing agreement with the Liberia Telecommunications Authority (LTA) to expand Internet coverage in Liberia. Well, Starlink is without a doubt expanding as every day passes. |
Now, how about we get right into the topic?
Have you been scratching your head from time to time but still haven’t been able to solve your Starlink’s “Disconnected Error?”
I assume you have. (At least I have been for a long time.)
Not anymore, because today we will help you address the problem and come up with solutions. And ultimately, “THE DISCONNECTED ERROR” will be gone for good.
Related:
Reason for the Starlink Disconnected Error:
To solve a problem, you first have to comprehend the root of the problem, don’t you?
So, you first have to figure out what caused the “Disconnected Error” to appear on your Starlink.
For your better understanding, I have narrowed it down to 4 major causes, and then we will elaborately discuss them:
- Obstructions
- Unfavorable Weather-Oriented Situation
- Hardware or Software Issue
- Network Capacity Overload.
Obstructions:
For smooth transmission of internet signals from the satellite to your device, there should not be any obstructions in between.
What does it mean?
When owing to various objects like trees or any other similar obstacles, it will cause hurdles in the path of the satellite signal, eventually creating interference.
As a result, the continuation of this obstacle will weaken the signal and may ultimately cause the “Disconnected Error” for your Starlink to show up.
We won’t get into much more detail about this aspect. If you still want to know more about this topic, click here and read in detail about our writing on “Obstructions.”
Unfavorable Weather-Oriented Situation:
There is not really much you can do against nature.
Quite often, because of adverse and unfortunate weather conditions, your Starlink satellite signal may get interrupted, and further continuance will cause the “Disconnected Error.”
So, what I am trying to establish here is that heavy rainfall, snow, or winds, along with potential natural calamities, could turn out to be the reason behind your “Disconnected error.”
Hardware or Software Issue:
The disconnected error of your Starlink could also originate from a problem within.
Basically, hardware issues or software malfunctions within your Starlink devices may cause disconnected errors.
But what exactly do I mean by hardware issues?
There could be something wrong with your Starlink devices.
They could be faulty or may simply not work anymore.
On the other hand, during updates, technical glitches might arise, which may also cause your system to malfunction.
Network Capacity Overload:
Have you ever heard of this term?
At times, a lot of users may be simultaneously using the same satellite for their internet facility.
And when a lot of users simultaneously use the internet, congestion occurs.
Due to this, you might come across a network capacity overload, which will cause problems like slow internet, weak signal, random disconnections, etc.
Note that this problem is more common in areas with a larger population, particularly when the majority of them are using a satellite internet connection via the same satellite.
Ok so now we have addressed some potential issues that could cause the
Starlink Disconnected Error.
It is time we discuss how we can solve this error.
Solving The Starlink Disconnected Error:
In case of an unfavorable weather condition:
- If any challenging weather situation emerges and you get disconnected, firstly you will need some patience, as you need to wait for some time till the situation stabilizes.
- Once you see that the weather has improved, go and inspect if your devices are okay or not.
- Make sure to remove any debris, snow, or anything similar if you find it on your Starlink dish, as it might work as an obstacle.
In case of network capacity overload:
Disconnect your devices from the internet that you will not be using, and see if the error still persists or not.
Other than this, truth be told, there is not much you can do from your end for this particular situation.
That’s because it is up to Starlink how they can solve this problem, and more often than not, they ensure that they solve this problem.
In case of software or hardware issues:
- Try restarting your Starlink router. Sometimes, this simple action does the trick.
- If it does not work, remove all cables and turn off the devices. After a few minutes, connect everything again and plug the power back on.
- Now, if these two steps do not work for you, it is time you try resetting your Starlink router. In case you do not know how to do that, check this out, as we have explained how you can easily reset your Starlink router.
You also need to make sure all your cables and Starlink devices are working fine. If they have been damaged, you will have to consider replacing them.
And as a last resort, if nothing works, you have to contact Starlink via their customer support.
In case of obstructions:
In this particular case, your plan of action is fairly simple.
Locate the obstruction and just get rid of the obstructions.
You should know that you can easily determine obstructions and their percentage level too through the Starlink App.
And in case you are not able to get rid of the obstruction, you might have to consider relocating your Starlink satellite dish.
Prevention Is Better Than Cure:
I can surely assume we all have heard this phrase from time to time.
And, we will try to apply this very phrase today.
Confused?
Let me break it down.
Instead of fixing Starlink’s “Disconnected Error,” isn’t it better we stay cautious and not let this problem arise in the first place?
So, here are some tips and tricks from us at Netizen Pulse to help you prevent the disconnected error:
- Ensure regular maintenance of your Starlink dish and the router by keeping them clean.
- Cables are ought to be monitored from time to time
- In terms of cables, I would suggest not compromising in terms of quality.
- Replace your devices if you notice your internet performance is declining gradually.
Final Thoughts:
Ultimately, if I have to address this in a nutshell, the Starlink Disconnected Error is a common problem for many Starlink internet users.
It is not something you should be worried about.
The error might happen owing to weak network strength owing to various causes such as weather unpredictability, faulty hardware, glitchy software, network congestion, etc.
We have addressed how you can solve all these problems above, and I sincerely hope I was able to solve your problem.
For any further queries, you know what to do.
Dispatch your queries through the comment section below, and we will get back to you.
Till then, make sure to stay connected with us, as we hope to come up with more such exciting updates concerning Starlink.
